Salon Equipment and Salon Furniture Network
IDI Salon Equipment
Intersate Design Industries LogoSalon Design and Day Spa DesignCustom Water FountainsInfrared Saunas for Day Spas

The most complete source for salon equipment and spa equipment and furniture on the Internet.

More Information
  • Privacy Policy
  • Contact Information
  • How to order
  • Frequently Asked Questions
  • Subscribe to RSS
  • Spa Equipment » Harmony Mediq » Harmony Mediq

    Harmony Mediq

    ITEM NUMBER: NQ-MEDIQ

    Ready to Buy?

    Call 800-762-1017 to speak with a Salon Design Specialist.


    QTY
    Description
    The Harmony Mediq is still an all-around cocoon suitable for wellness centers, spa hotels.

    Features:

    • Infrared sauna (double infrared lamp)
    • Steam sauna
    • Aroma
    • Vichy shower (4 vichy shower spouts)
    • Vibromassage
    • 4 chromotheraphy lights
    • Hydromassage
    • Air bubble massage
    • Underwater handmassage
    • Music system (optional)
    • Face fan
    • Disinfection system
    • Water heater
    • Hand shower
    • Hood (fully accessible from both sides)
    • Longer bathtub
    • Faster water inlet and drainage
    • Vichy shower from tub and water system

    Measurements:

    Preconditions for installation

    Room

    Equipment is designed for use in indoor conditions. The temperature of the room where the equipment is used should be between 5°C-40°C and the relative humidity of the room should not exceed 85%. As in the working regime the machine creates humidity, be sure that the construction of the room is moisture proof and the room has ventilation. It is recommended to have a general trap on the floor. It is important that after installation there will be adequate room for the cover of the equipment to be easily opened as there must be sufficient room during the service maintenance.

    Power

    The electrical installation of the Harmony equipment should be carried out by qualified specialists. Power cord should be protected with the protective switch which is in accordance with requirements (CEI 64-8). Power cord material should be at least 3x2,5 mm² copper crosscut wire. The Power cord should be connected without intermediate connections to the moisture proof junction box on the wall close to the equipment. Maximum combined power consumption for the equipment is 4,5 kW. The protective device current in front of equipment feeder is 20 A.

    Water

    Clean water is important for the normal functioning of the equipment. If the rust and mineral matter consistency in the water is too high, then it is advisable to install water filters. The recommended water pressure is 2-4 Bars. 2 water pressure hoses are required, one for hot another for cold water with the ending being ¾" threaded.Water drainage hose should be of Ø 50 mm. The length of drainage hose depends on the distance from drainage opening on the ground.

    Contact one of our Salon Design Specialist Today to add The Harmony to your Salon Equipment.

    Call 800-762-1017

     

     

    Do you have questions about this product? Ask us! *

    How can we reach you?

    By phone
    By email


    Recently Viewed Products
    Harmony Mediq
    Harmony Mediq

    Our Price: Call